Nortel Networks DCT1900 manual Modular Cabinet CPU Cabling, Introduction

Technical Product Manual - DCT1900

Installation Instructions, Modular Cabinet – CPU Cabling

CHAPTER 20

Modular Cabinet – CPU Cabling

20.1Introduction

This chapter describes all the cabling connected to the CPU1, REX-BRD0004 or 2/ROFNB 157 19/2, and to the CPU2, REX-BRD9033 or REX-BRD9034.

Connections to the CPU1/CPU2 board include:

•Printers - via the MCCB board

•PCs - via the MCCB board

•Other CPU boards - via the SDB or directly

•Alarm Devices - via the MCCB board

Warning

The printer and PC must be placed in a restricted area if connected directly to the modular cabinet.

The printer and PC must be connected to AC mains with a suitable power cord: safety earth to safety earth, non-earth to non-earth (the safety earth must be guaranteed).

Install-DCT1900/R8/mw	20-1
© 2000-2005