Nortel Networks DCT1900 manual Board Reset, Procedure a, Procedure B

Technical Product Manual - DCT1900

Maintenance, Part Replacement

5.9Board Reset

To reset a board execute one of the following procedures.

Procedure A

1.Execute a Reset-board by the System Manager-Control menu.

Procedure B

1.Execute a Replace board by the System Manager–Control menu.

2.Disconnect board from back plane connector.

3.Insert board again. The board will now automatically be tested and taken into service.

Maint-DCT1900/R8/mw	5-5
© 2000-2005