Jwin JX-CD492 owner manual Listening to the Radio, Storing Preset Stations

LISTENING TO THE RADIO

1. Set the FUNCTION selector (8) to RADIO mode

RADIO

(CD / RADIO OFF) TAPE CD

STORING PRESET STATIONS

1.Tune to the station you wish to store by pressing TUNING UP or DOWN button (14)/ (17) or (30)/(31)

SKIP/	SKIP/
TUN DN	TUN UP

OR

2. Press the BAND button (13) or (32) for AM or FM band.

Example : FM mode

3.Press the TUNING Up or Down button (14)/(17) or (30)/(31) to tune to the desired station.

SKIP/	SKIP/
TUN DN	TUN UP

OR

Manual Tuning - Press and hold the TUNING UP or DOWN buttons (14)/(17) or (30)/(31) until the display approaches your desired station. Then tap the buttons repeatedly until the display shows the exact frequency.

Auto tuning - Press the TUNING forward or backward buttons momentarily and release. The tuner will move up or down to the next available station.

4.When finished listening, slide the FUNCTION selector (8) to TAPE (RADIO/CD OFF) position.

The unit enables you to program 10 stations of FM and 10 stations of AM band.

2.Press the PROGRAM button (21) or (27) once. (“MEMORY” flashing)

3.Press the FOLDER/M-UP or FLDER-DN button (20)/(12) or (26) repeatedly to set the desired preset station number. (“MEMORY” still flashing)

4.Press the PROGRAM button (21) or (27) again. The station is stored. (“MEMORY” steady on)

5.To store other stations, repeat above steps.

RECALLING PRESET STATION

Press the FOLDER/M-UP or FOLDER/M-DN (20)/(12) or (26) button on main unit or remote control repeatedly to select the desired station.

6