Jwin JX-CD492 owner manual Playing Cassette Tape, To suspend playback, Tape Recording From Tuner

PLAYING CASSETTE TAPE	3. To playback, press the PLAY button (5).
1. Set the FUNCTION selector (8) to TAPE mode

RADIO

TAPE CD

2.Press STOP/EJECT button (5) to open the cassette door. Insert a prerecorded tape to the cassette compartment, close the cassette door.

4.To stop Playback, press the STOP/EJECT button (5).

To suspend playback	To Fast Forward or Rewind tape
Press PAUSE button (5).	Press REW or F.FWD button (5).

To resume playback, press the PAUSE button again.

TAPE RECORDING From TUNER

1.Set the FUNCTION selector (8) to the TUNER mode.

2.Follow steps 2 and 3 in "LISTENING TO THE RADIO" to tune in the station you wish to record.

3.Insert a blank tape to cassette compartment then close the cassette door.

4.Press the RECORD and PLAY buttons (5) at same time to start recording.

5.Press STOP/EJECT (5) to stop recording.

Note:	1.	Return to Tape mode, rewind the tape
		to listen to recorded materials.
	2.	Recording through built-in microphone
		(Tape mode): similar to
		above instructions.

TAPE RECORDING From CD or MP3

1.Select the FUNCTION selector (8) to CD mode then open the CD door by lift up door lid (6).

2.Put a disc inside CD compartment and then close the CD door

3.Insert a blank tape to cassette compartment then close the cassette door.

4.Press the RECORD and PLAY buttons (5).

5.Press PLAY/PAUSE (18) or (28) to start CD playing for recording.

6.Press STOP/EJECT (5) to stop recording.

7.Press the STOP/BAND button (13) or (32) to stop CD playing.

13