Nortel Networks DCT1900 manual FPGA.mcs Version Download Procedure

Technical Product Manual - DCT1900

Installation Instructions, AWS1024 Meridian, AWS1025 Norstar, AWS1026 Lucent

<FPGA>.mcs Version Download Procedure

1.At the DLU> prompt in the terminal window, press df and return. Should see

“Erasing download area, blocks 3,4,5 and “Transmit <fpga>.mcs file now, CTRL-C to abort” and “DLU”.

2.Press File:Send File in the Tera Term application; select the <FPGA>.mcs file you want to download and press open. A pop up window should display the filename you are sending and the bytes being transferred. When the file is completely transferred (~4 min.), the window will disapper and the board should reset. On the display you should see “>>>Boot DLU[PBX type] Ver: Application version H/W:FPGA version.......” and “DLU”.

At this point, if both of these procedures have completed without error, you have successfully upgraded the DLU board.

Install-DCT1900/R8/mw	15-3
© 2000-2005