Nortel Networks DCT1900 manual Printer Cable Tsrnb 101, Signal PIN DTR DCD RTS CTS GND

Technical Product Manual - DCT1900

Installation Instructions, Modular Cabinet – Cables

26.7Printer Cable – TSRNB 101 23

The printer cable (see Figure 26–6) is used to connect the printer to the MCCB. The maximum permissible length for self–made cables is 49 ft.

Straight exit	90° exit
(for Printer)	(for MCCB)

761 in.

SIGNAL	PIN		PIN	SIGNAL
TX	2		2	RX
RX	3		3	TX
DTR	20		1	DCD
		*
RTS	4		8	CTS
DCD	8		4	DTR
CTS	5		7	RTS
GND	7		5	GND

*In some cases pin 20 and 4 on the 25 pin SUB-D connector must be interconnected for a correct functioning printer

Fig. 26–6 Printer Cable - TSRNB 101 23

26-6	Install-DCT1900/R8/mw
	© 2000-2005