Nortel Networks DCT1900 manual Installation Set Sync Port CPU, Sdb

Technical Product Manual - DCT1900

Product Specifications, Cabinets

5.4Synchronization Distribution Board, SDB -REX-BRD0006 or ROANB 101 38

The SDB is mounted to the Modular Cabinet during system installation. It is part of the Sync Kit - see Paragraph 5.5 only required in multiple system configurations.

Length x width	:	2.6" x 2.2" (66 x 56mm)
Connector for external cables	:	shielded modular jacks RJ12 with six terminals

5.5Installation Set Sync Port CPU

The installation set comprises material to install the sync ports which enable PWT air interface synchronization between DCT1900 systems. The set comprises the following material:

SDB	: Synchronization Distribution Board to be mounted to the
	modular cabinet which enables the connection of
	synchronization cabling.
CPU/SDB cables	: Connects the CPU to the SDB.
CE Label	: CE marking label to be used if the cabinet is CE marked.

5-2	Specs-DCT1900/R8/mw
	© 2000-2005