Nortel Networks DCT1900 manual Equipment Verification, Miscellaneous Items, Switch Room

Technical Product Manual - DCT1900

Installation Instructions, General

zequipment to measure the delay times of Base Station cables and external synchronization cables-TDR

zSiemens 66 block

zpunch down tool

2.5Equipment Verification

Obtain a copy of the order that was placed for the system and verify the order against the shipping forms found on the boxes containing all the DCT1900 equipment.

2.6Miscellaneous Items

Check that the following additional items are available:

zBase Station cables (see Chapter 16, Paragraph 16.2)

zRJ45 plugs and crimper for Base Stations

zMaterial for external sync cables as specified in Chapter 18, Paragraph 18.2 if PWT air interface synchronization is required in a multi DCT1900 system environment.

zIBM compatible personal computer as specified in Installer’s Quick Guide (CSMW)

zEpson compatible printer (optional)

z#10-12 gauge wire to connect the Modular Cabinet to protective ground.

2.7Switch Room

Verify that there is an adequate wall space to mount the equipment. Verify the locations and availability of adequate power and earth ground.

2-2	Install-DCT1900/R8/mw
	© 2000-2005