Tektronix 560 user manual Face Up

Printing Basics 4

SIDE 2

1.Place the paper in the PAPER tray with the side to be printed face down (the side that has already been printed is now face up); the top of the page is under the paper tray’s hooks.

1

PAPER	1
A4

32564-09a

Insert the PAPER tray into the printer. If

you have a Lower Tray Assembly, you can use any of the printer’s media tray slots: Upper, Middle, or Lower; for these instructions, use Upper.

Note For a multi-page document, print odd-numbered pages for Side 1. (This selection is application-specific).

2.Select the tray and output order, using either (a) a supported driver or (b) a supported driver or the printer’s front panel; then send the print job:

■Making selections in the driver

Select the tray	Upper	Listed under Paper Source or Tray
		Selection (depending on the driver).
Output Order	Face Up	Listed under Options or TekColor
		Options (depending on the driver).

■Making selections in the front panel

Select the tray	Upper	Listed under Default Tray in the
		Printer Defaults menu.
Output Order	Face Up	Listed under Output Order in the
		Printer Defaults menu.

User Manual 4-55