Tektronix 750 manual Solution

Page 56

Solution:

1.Choice of media; check the following:

■ Use Tektronix media.

■

■

Use the correct media tray for the media you are using.

When using the Multi-Purpose Tray, select the correct media in the front panel.

2.Relative humidity may be too low (below 30 percent relative humidity).

■Refer to Calibrate for Paper in the printer’s front panel and run this mode:

■Press Help, scroll to Print Quality, press Menu, scroll to Calibrate for Paper, press Menu, print the references pages. Follow the instructions on these pages and adjust the transfer setting.

3.Replace imaging unit or transfer kit.

User Guide

45

Image 56

Contents L O R P R I N T E R Phaser 750 Color Printer User Guide Page Page Warranty Printer WarrantyConsumables Warranty Page User safety summary Terms in manualSymbols as marked on product Contents Phaser 750 Color Printer Tektronix Supplies and Accessories SuppliesHigh Capacity Toner Cartridges Standard Toner CartridgesFuser Roll and Cleaning Pad FuserImaging Unit Transfer KitTektronix Color Laser Labels Tektronix Professional Printing PaperTektronix Transparency Film Paper Trays Transparency TraysPrinter Station Internal Hard DriveAdditional memory Automatic Duplex/Lower Tray AssemblyPhaserShare Token Ring Network Card Print Quality Modes Fast ColorFeatures TekColor Color CorrectionsPaper Tips Paper TipsLetterhead Supported page sizes and image area Trays Paper and Transparency TraysPaper Tray Transparency Tray Loading Paper or Transparency Tray Maximum Tray Level Multi-Purpose Tray Multi-Purpose TrayOverview Thin Normal Thick Loading the Multi-Purpose Tray Tektronix Transparency Tektronix Glossy Coated Paper Tektronix Premium Cover PaperTektronix Color Laser Label PaperEnvelope #10 Paper 2nd SideHeavy Paper Special Media Loading Special MediaTektronix Transparencies 0236-13 Printing #10 Envelopes EnvelopesEnvelope Guidelines for envelope printing Printing on Tektronix Color Laser Labels At the printerApplication LabelsGuidelines for printing on labels Automatic 2-Sided Printing Sided Prints0632-28 Windows NT4 Start/Settings/Printers PC Drivers Windows 95/ WindowsClick Properties Click Print on 2-Sides optionMacintosh Drivers LaserWriter Select Print on Both SidesManual 2-Sided Printing From the Multi-Purpose Tray Side3 4 5 6 3 4 5 6 Troubleshooting Print Quality Replace the Toner CartridgePrint Quality AgentaSymptom Problem in one color only Solution Adjust the color density Replace the Toner Cartridge of the color that has problemsSymptom Problem in all four colors Solution Replace Imaging Unit, or Fuser, or Fuser RollSymptom All four colors are solid black Symptom All four colors are extremely fadedSolution Symptom Pieces of print image missing all four colors Replace FuserMedia Jams Preventing media jamsJam-Wrong Media JamsJam at a Jam at B Lower Tray Assembly Only Jam at C Remove the jammed media from the Fuser Jam at D Open the front door and the right side door Jam at E Jam at Multi-Purpose Tray Jam at Duplex Unit Re-insert the Duplex Unit into the printer’s upper slot Printer CD-ROM Getting HelpFront panel Help button PhaserLink Software Tektronix web siteTekSMART Knowledge Base Getting HelpCustomer Support Centers Other online servicesColor Connection Color Density Controlling Color DensityPrint and use the Color Reference Color Density Printed on recycled paper