Aluminum Electrolytic Capacitors/ NHG
Radial Lead Type
Series: NHG Type: A
■Features
●Endurance : 105 °C 1000 h to 2000 h
●RoHS directive compliant
■ Specifications
Category Temp. Range |
|
| ||||
Rated W.V. Range |
| 6.3 V.DC to 100 V.DC |
| 160 V.DC to 450 V.DC | ||
Nominal Cap. Range |
| 0.1 µF to 22000 µF |
| 1.0 µF to 330 µF | ||
Capacitance Tolerance |
|
|
| ±20 % (120 Hz/+20 °C) | ||
DC Leakage Current | I | < 0.01 CV or 3 (µA) After 2 minutes | I < 0.06 CV +10 (µA) After 2 minutes | |||
| (Which is greater) |
| ||||
|
|
|
| |||
|
|
|
|
| ||
tan δ |
|
| Please see the attached standard products list | |||
| After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum | |||||
| of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors | |||||
| are restored to 20 °C, the capacitors shall meet the limits specified below. | |||||
Endurance | Duration : 6.3 V.DC to 100 V.DC | : (φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours | ||||
| 160 V.DC to 450 V.DC : 2000 hours |
| ||||
|
|
| ||||
|
| |||||
| Capacitance change | ±20 % of initial measured value | ||||
| tan δ |
| < 200 % of initial specified value | |||
| DC leakage current | < initial specified value |
| |||
Shelf Life | After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized | |||||
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) | ||||||
| ||||||
■Frequency correction factor for ripple current
W.V.(V.DC) | Cap. (µF) |
|
| Frequency (Hz) |
|
| ||||
|
|
|
|
|
|
| ||||
60 | 120 |
| 1 k |
| 10 k | 100 k | ||||
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
| 0.1 | to | 33 | 0.75 | 1.00 |
| 1.55 |
| 1.80 | 2.00 |
|
|
|
|
|
|
|
|
|
|
|
6.3 to 100 | 47 | to | 470 | 0.80 | 1.00 |
| 1.35 |
| 1.50 | 1.50 |
|
|
|
|
|
|
|
|
|
|
|
| 1000 | to | 22000 | 0.85 | 1.00 |
| 1.10 |
| 1.15 | 1.15 |
|
|
|
|
|
|
|
|
|
|
|
160 to 450 | 1 | to | 330 | 0.80 | 1.00 |
| 1.35 |
| 1.50 | 1.50 |
|
|
|
|
|
|
|
|
|
|
|
■Dimensions in mm (not to scale)
Sleeve | φd±0.05 |
| |
Pressure relief |
| + | |
|
| ||
φ6.3< |
|
| |
|
|
| – |
L✽ | 14 min. | 3 min. | |
✽ L<16 | : L±1.0 |
|
|
L>20 | : L±2.0 |
|
|
φ5 to φ8
φD±0.5
F±0.5
[mm]
φ10<
φD±0.5
(mm)
Body Dia. φD | 5 | 6.3 | 8 | 10 | 12.5 | 16 | 18 |
|
|
|
|
|
|
|
|
Lead Dia. φd | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 |
|
|
|
|
|
|
|
|
Lead space F | 2.0 | 2.5 | 3.5 | 5.0 | 5.0 | 7.5 | 7.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. |
|
Should a safety concern arise regarding this product, please be sure to contact us immediately. | Apr. 2008 |
|