Universal R-320 manual Suggested Speed Setting

SUGGESTED SPEED SETTING

As tested at the factory, the following are suggested setting of speeds and time delays:

		DIAL SETTING
*	Conveyor Speed	_______________
*	Turning Unit	_______________
*	Applier	_______________
	Product Spacer	_______________
	These settings will product approximately	_______________
	parts per minute production

If speed of any of the above “*” are changed for any reason, comparable changes in the other settings should be made.

The above speed settings are provided only as guidelines for start-up and may need to be changed because of variables in voltages, area to area, and other variables over which we have no control.

SETUP INSTRUCTIONS