Cognitive Solutions EZLP-UG00000 user manual Auto Recalibration

Page 21

NOTE: WHEN TIME

IS SET TO 0 THE

LABEL WILL REMAIN

ADVANCED UNTIL

THE NEXT LABEL IS

PRINTED.

Auto Recalibration

Check and Apply Enable Auto Recalibration and the printer will automatically attempt to recalibrate in the event an index mark is not detected.

Auto Top Of Form

Check and Apply Enable Automatic TOF and the printer will feed a label when the printer is turned ON or the printhead is latched.

Indexing

Indexing indicates to the printer the index type of the media being used. The Indexing On check box must be checked when using Bar, Gap, or Notch style indexing. Uncheck the Indexing On box when using continuous media.

Label Presentation

Label presentation advances media out of the printer after printing a label and then retracts the media prior to printing the next label.

Advance = Distance the media advances after printing a label.

Retract = Distance the media retracts prior to printing a label.

Time = Amount of time in seconds the label remains presented prior to retracting.

21

Image 21
Contents USER’S Manual Copyright 2009, CognitiveTPG Table of Contents Introduction Package ContentsWelcome Operating EnvironmentPrinter Feature Overview Front/Rear ViewComponent Function Inside View Printer Installation Setting up the EZ-LP PrinterConnecting the Interface and Power Cables Cognitivetpg Approved Loading MediaClick Power OFF printer to end hexadecimal dump mode Self-TestingInstalling the EZ-LP Select Keep existing driver recommended and click Next Page Cognitivetpg Printer Installing Printer via USB Windows Driver InstallationPage CognitiveTPG Printer Administrator Utility Connection SettingsSelect the System Printer Connection radio dial Select the Use Network Connection radio dial Printer SettingsValues Label Positioning Auto Recalibration Click the Delete Selected Objects button Profile Management Script Editor Firmware UpgradePage Making Configurations Changes Using DOS Commands Advanced EZ-LP FeaturesUSB a Port Cleaning the Printer Cleaning and MaintenanceCleaning the Thermal Printhead and Platen Cleaning SuppliesSymptom Possible Cause Recommended Solution Troubleshooting & Default SettingsParameter Default Setting