Cognitive Solutions EZLP-UG00000 user manual Firmware Upgrade, Script Editor

Page 24

CAUTION! TURNING

THE PRINTER OFF

DURING FIRMWARE

INSTALLATION COULD DAMAGE THE PRINTER.

NOTE: If your computer is connected to the internet, use the “get latest firmware from cognitivetpg” button. This action will also load current fonts. Update will take a few minutes.

Firmware Upgrade

1.Select the Firmware Upgrade tab.

2.Click the Select Firmware File button.

3.Select the appropriate Firmware file and click Ok.

4.Click the Update Firmware button.

Script Editor

Use the Script Editor in CognitiveTPG Printer Administrator to send programming language code to the printer. The EZ-LP printer will not print CPL label formats but will recognize CPL based printer setting commands. For more information on programming CPL please refer to the CPL Programmers guide located on the CognitiveTPG Web site www.CognitiveTPG.com.

24

Image 24

Contents USER’S Manual Copyright 2009, CognitiveTPG Table of Contents Package Contents IntroductionWelcome Operating EnvironmentPrinter Feature Overview Front/Rear ViewComponent Function Inside View Printer Installation Setting up the EZ-LP PrinterConnecting the Interface and Power Cables Loading Media Cognitivetpg ApprovedClick Self-Testing Power OFF printer to end hexadecimal dump modeInstalling the EZ-LP Select Keep existing driver recommended and click Next Page Cognitivetpg Printer Windows Driver Installation Installing Printer via USBPage CognitiveTPG Printer Administrator Utility Connection SettingsSelect the System Printer Connection radio dial Printer Settings Select the Use Network Connection radio dialValues Label Positioning Auto Recalibration Click the Delete Selected Objects button Profile Management Firmware Upgrade Script EditorPage Advanced EZ-LP Features Making Configurations Changes Using DOS CommandsUSB a Port Cleaning and Maintenance Cleaning the PrinterCleaning the Thermal Printhead and Platen Cleaning SuppliesTroubleshooting & Default Settings Symptom Possible Cause Recommended SolutionParameter Default Setting