Cognitive Solutions EZLP-UG00000 user manual Cleaning and Maintenance, Cleaning the Printer

IMPORTANT!

DISCONNECT POWER PRIOR TO CLEANING THE EZ-LP.

Chapter 6: Cleaning and Maintenance

For optimal printhead performance CognitiveTPG recommends cleaning the interior components (printhead, platen roller, media sensor, peel bar (if installed), ribbon, and media paths) every 20,000 inches (508 m). The thermal printhead should be cleaned every 5,000 inches if pre-printed labels are used. Proper maintenance reduces replacement costs by extending the life of the printhead and improves the performance of the printer.

WARNING!

INCORRECTLY

CLEANING PRINTER

WILL CAUSE

PERMANENT DAMAGE AND VOID WARRANTY.

COGNITIVETPG

RECOMMENDS USING A CERTIFIED CLEANING PEN FOR CLEANING THERMAL PRINTHEAD.

Cleaning the Printer

Clean the exterior of the printer and the media tray using a lint-free cloth, and if necessary, a mild detergent solution.

Cleaning the Thermal Printhead and Platen

1. Open the print mechanism.

A

B

2.Gently clean the printhead (A), platen roller (B) and media path using a

CognitiveTPG approved cleaning pen, card or a soft, lint-free cloth saturated with 99% isopropyl alcohol.

Cleaning Supplies

EZ-LP Cleaning Supplies

Part #	Size (inches)	Items per box	Description
14-00-0001	4.5” x 6”	25	Cleaning card
14-00-0002	none	12	Cleaning pen

28