Cognitive Solutions LXG-UG00000 Printer Settings, Select the Use Network Connection radio dial

Page 15

HELPFUL TIP: PRINT

A SELF TEST TO

DETERMINE PRINTER’S CURRENT SETTINGS.

A SELF TEST CAN

BE PERFORMED BY HOLDING THE FEED BUTTON WHILE TURNING PRINTER POWER ON. CONTINUE TO HOLD THE FEED BUTTON UNTIL SELF TEST PRINTS.

NOTE: Using the parallel port connection with Administrator provides limited functionality due to the printer’s uni-directional communications on this port. Settings can be sent via Administrator, but they will not fill in on screen.

Serial Connection Parameters

•Baud Rate

•XON/XOFF

•Buffer Size

•Buffer Overflow

Connecting Via Ethernet

1.Select the Use Network Connection radio dial

2.Input the printer’s IP Address if static IP Address is to be used, otherwise, with

DHCP enabled, your server will assign an IP Address to the printer

3.Input the printer’s RTEL port number

Ethernet Connection Parameters

•IP Address

•Net Mask

•Gateway

•DHCP

•LPD

•RTEL

•RTEL Port

•Ethernet Text Buffer

Connecting Via Parallel

1.Select the Use Parallel Connection radio dial

2.Select the Parallel (LPT) Port to which the printer is connected

3.Click Connect

Printer Settings

Print Speed

The Print Speed value sets the printing speed of the printer.

•Low = 2 inches per second

•Normal = 2 inches per second

•High = 3 inches per second

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Guide Copyright 2012, CognitiveTPG Table of Contents Operating Environment Package ContentsIntroduction WelcomePrinter Feature Overview Front/Rear ViewComponent Function Inside View Advantage LX Communication Interfaces 2 and 4 Model DetailComponent DT & TT Models Printer Installation Setting up the Advantage LX PrinterConnecting the Interface and Power Cables Electrostatic Loading Thermal Transfer Ribbon Click Power OFF printer to end hexadecimal dump mode Self-TestingDownloading CognitiveTPG Printer Administrator CognitiveTPG Printer Administrator Utility Connection SettingsSelect Use Serial Connection radio dial Click Connect Printer SettingsSelect the Use Network Connection radio dial Select the Use Parallel Connection radio dialValues Label Positioning Auto Recalibration Click the Delete Selected Objects button Profile Management Firmware Upgrade Sample Test Script in CPL Script EditorCleaning the Thermal Printhead and Platen Cleaning and MaintenanceCleaning the Printer Cleaning SuppliesSymptom Possible Cause Recommended Solution Troubleshooting & Default SettingsParameter Default Setting
Top Page Image Contents