IMPORTANT! PRIOR TO CONNECTING ANY INTERFACE CABLE AND POWER CABLE TO PRINTER, MAKE SURE PRINTER IS OFF.
Chapter 2: Printer Installation
Setting up the Advantage LX Printer
Connecting the Interface and Power Cables
POWER OFF |
1. Make sure power switch is OFF |
| 2. Connect power cable to AC adapter |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Connect the AC adapter to the power | 4. Plug the power cable into an AC |
connector on the printer | outlet |
5.Connect the interface cable to the rear of the printer. For Serial or Parallel cables, securely fasten the interface connector screws or clips.
NOTE: The Advantage LX IS CONFIgured to use a standard null modem crossover serial cable when using the com/ser port to connect to a dte device such as a computer.
I O I O COM/SER |
Power OFF |
Serial |
(DB9) |
ETHERNET |
Power OFF |
Ethernet |
PARALLEL |
Power OFF |
Parallel |
8