Label Positioning

important! thermal

transfer mode

requires the use of a thermal transfer printer and thermal transfer print ribbon. direct thermal mode requires the use of direct thermal media.

Media Adjust

Adjusts print contrast on object leading edges for optimum print quality. Adjustment of this parameter is not normally required; refer to Cognitive Programming Language (CPL) Programmer’s Guide for more detail.

Pitch

The pitch represents the dots per inch (dpi) setting for the printer.

Values:

100 or 200 for 200 dpi printers

Darkness

The Darkness value adjusts the print darkness.

Darkness range: -200 to 800

NOTE: THE FACTORY DEFAULT FOR DARKNESS IS 0.

Primary Language

Selects the primary command language the printer uses. The Advantage LX is defaulted to CPL (Cognitive Programming Language). AUTO, EcPL, and ZcPL are used for other printer models.

NOTE: THE Advantage LX DOES NOT SUPPORT TPCL COMMAND LANGUAGE

Thermal Mode

Select direct thermal or thermal transfer based on the model of Advantage LX printer and the type of media being used. Thermal transfer Advantage LX printers can be set to operate in direct thermal mode.

Print Width

The Print Width value adjusts the printing width of the printer for the particular media being used.

Maximum print width is 4.1” (104 mm), media width range is 2.0 to 4.25” (50 to 108 mm) for 4-inch Advantage LX (LBD42 and LBT42) models.

Maximum print width is 2.2” (56 mm). Media width range is 1.0” to 2.4” (25 to 61 mm) for 2-inch Advantage LX (LBD24 and LBT24) models.