Dymo SE450, 450 TWIN TURBO, 450 TURBO, 450 Duo manual Using a Print Server

Page 19

Using a Print Server

4Select the printer and then click Add.

The shared printer is added to the Printer List dialog box.

Note The LabelWriter Duo printer is actually two printers (Label and Tape), so you must add both printers separately.

5Close the Printer List dialog box.

Using a Print Server

You can print over a network to a DYMO label printer connected to a wired or wireless USB print server. DYMO now offers a LabelWriter Print Server to easily share your LabelWriter printer on a network. Visit the DYMO Web site to learn more about our print server.

A DYMO label printer works the same as any other printer connected to a print server and requires no special configuration. The steps for installing and printing with print servers vary by print server type and manufacturer. See the documentation provided with the print server for detailed installation and printing instructions.

DYMO label printers support printing from Windows XP (Service Pack 2), Windows Vista, Windows 7, and Mac OS v10.4 or later.

The following are notes and tips for the print server installation:

•Make sure that your print server supports the type of operating system installed on your computer (Windows or Mac OS).

•Most print servers only support the LabelWriter DUO Label printer. However, the DYMO LabelWriter Print Server does support both the LabelWriter DUO Label and Tape printers.

•DYMO label printers with older firmware versions do not support print servers. See Printer Firmware Versions that Support Print Servers.

In general, during print server installation, if you are prompted for the printer or printer driver, select the option for installing a printer driver from a disk and insert the DYMO Label Software CD in the computer’s CD-ROM drive. If the installer doesn’t automatically locate the printer drivers, navigate to the printer drivers on the CD. If prompted to select your printer, select the printer physically connected to the print server.

To connect your label printer to a print server

1Connect one end of a USB cable to the USB connector on your label printer and the other end to the USB connector on the print server.

2Connect the print server to your network.

3Connect power to the label printer and print server.

4Install and configure the print server on your network.

5Confirm that you can print to the label printer from the computer you are using to install and configure the print server.

6Add the printer connected to the print server to other computers in the workgroup.

15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents
User Guide Copyright Contents Iii About the LabelWriter Printer LabelWriter Printer FeaturesAbout the LabelWriter Printer Printing Labels System RequirementsDeveloper and SDK Information About the LabelWriter Printer Loading Labels About LabelsWith the printer plugged in, press the form-feed button to Ordering Labels This page intentionally left blank for double-sided printing Printing to a Shared Printer from Windows Printing Over a NetworkSharing a Printer on a Network Select Share this printer Printing to a Shared Printer from Windows To share the printer Windows Adding a Network Printer Printing to a Shared Printer from Mac OSAdding a Shared Printer Using a Print Server Printer Firmware Versions that Support Print Servers Caring for Your Printer Caring for Your Printer Getting Help TroubleshootingStatus Light Labels Do Not Feed Correctly Performing a Printer Self-TestClearing Label Jams Correcting Poor Print QualityFrom the Properties dialog box, click Printing Preferences Printer Does Not Print or Stops PrintingObtaining Technical Support Limited WarrantyTechnical and Environmental Information Technical SpecificationsDevice Certification LabelWriter SE450 Printer Technical SpecificationsDocumentation Feedback Environmental Information
Related manuals
Manual 16 pages 45.89 Kb Manual 29 pages 39 b Manual 12 pages 6.25 Kb Manual 14 pages 7.17 Kb Manual 14 pages 38.27 Kb Manual 2 pages 44.84 Kb