Nortel Networks 302403-G manual Shows the front panel of the BPS2000-4TX MDA

Page 10

Figure 2 shows the front panel of the BPS2000-4TX MDA.

Figure 2 BPS2000-4TX MDA front panel

1

BPS2000-4TX MDA

2

 

3

9792EA

Table 3 describes the BPS2000-4TX MDA front-panel components.

Table 3 BPS2000-4TX MDA description

Item Label Description

1

10/100

10BASE-T/100BASE-TX port status LEDs:

On (green): The corresponding port is set to operate at 100 Mb/s.

On (yellow): The corresponding port is set to operate at 10 Mb/s.

Off: The link connection is bad or there is no connection to this port.

2

Activity

Port activity LEDs (green):

Blinking (green): Indicates the network activity level for the corresponding port. A high level of network activity can cause LEDs to appear to be on continuously.

8

Image 10
Contents Installing Media Dependent Adapters MDAs Copyright 2001 Nortel Networks Product Safety Fibre optique sont raccordés à une source lumineuse Introduction Supported interfaces and products MDA descriptions 10BASE-T/100BASE-TX MDAs 400-4TX MDA Item Label Description Shows the front panel of the BPS2000-4TX MDA 100BASE-FX MDAs 400-2FX MDA Shows the front panel of the dual-port BPS2000-2FX MDA BPS2000-2FX MDA 400-4FX MDA Shows the front panel of the BPS2000-4FX MDA Describes the BPS2000-4FX MDA front-panel components 1000BASE-X MDAs 450-1SR MDA Port redundant 450-1SR / 450-1SX MDA description Shows the 450-1LR MDA and the 450-1LX MDA front panels 450-1LR MDA Port redundant 450-1LR and 450-1LX MDA description Gbic MDA 450-1GBIC MDA Installing an MDA Describes the 450-1GBIC MDA front-panel componentsMDA RJ45 UTP Installing an MDA Replacing an installed MDA Installing a Gbic in an MDA Removing an Installed Gbic from an MDA Installing a Gbic1000BASE-LX Multimode Applications Removing a Gbic with spring tabs