Nortel Networks 302403-G manual 450-1SR / 450-1SX MDA description

Page 20

Table 9 describes the 450-1SR MDA and the 450-1SX MDA front panel components.

Table 9 450-1SR / 450-1SX MDA description

Item

Label

Description

1

Link

Communication link LEDs (green):

 

 

On: Valid communications link.

 

 

Off: The communications link connection is

 

 

bad or there is no connection to this port.

 

 

Blinking: The corresponding port is

 

 

management disabled.

2

Phy

Phy status LEDs (green):

 

(or)

 

 

Phy Select

 

 

 

On: The corresponding Phy port is active.

 

 

Off: The corresponding Phy port is in backup

 

 

mode or there is no connection to this port.

3

Activity

Port activity LEDs (green):

 

 

Blinking: Indicates network activity level for

 

 

the corresponding port. A high level of

 

 

network activity can cause LEDs to appear to

 

 

be on continuously.

4

 

1000BASE-X SC port connectors.

 

 

 

18

Image 20
Contents Installing Media Dependent Adapters MDAs Copyright 2001 Nortel Networks Product Safety Fibre optique sont raccordés à une source lumineuse Introduction Supported interfaces and products MDA descriptions10BASE-T/100BASE-TX MDAs 400-4TX MDA Item Label Description Shows the front panel of the BPS2000-4TX MDA 100BASE-FX MDAs 400-2FX MDA Shows the front panel of the dual-port BPS2000-2FX MDA BPS2000-2FX MDA 400-4FX MDA Shows the front panel of the BPS2000-4FX MDA Describes the BPS2000-4FX MDA front-panel components 1000BASE-X MDAs 450-1SR MDA Port redundant 450-1SR / 450-1SX MDA description Shows the 450-1LR MDA and the 450-1LX MDA front panels 450-1LR MDA Port redundant 450-1LR and 450-1LX MDA description Gbic MDA 450-1GBIC MDA Installing an MDA Describes the 450-1GBIC MDA front-panel componentsMDA RJ45 UTP Installing an MDA Replacing an installed MDA Installing a Gbic in an MDA Removing an Installed Gbic from an MDA Installing a Gbic1000BASE-LX Multimode Applications Removing a Gbic with spring tabs