CONNECTIONS & SETUP
THE POINT AND SELECT NAVIGATION METHOD
You can “get around” in the menu system by using just a few buttons on the remote control. We call this the “Point and Select” method of navigation, and it has two steps.
1.Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left or right, press the left or right arrows.
2.Select a menu item by pressing MENU or OK.
Selecting an item tells the monitor’s menu system to go ahead and make the change or go to a place you have indicated.
OK
Point and Select
buttons
MENUCLEAR
SET THE TIME
The first step in the setup is to set the time.
1.Press MENU on the remote control to bring up the Main menu.
MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental Controls
7 Setup
0 Go Back
2.Point to Time, and press OK to select it.
TIME
1 Set Time
2 View Warranty Clock
0 Go Back
3.Point to Set Time, and press OK to select it.
Alternate Navigation Method
In addition to using Point & Select, you can also select a menu item by entering the item number with the number buttons on the remote.
Press CLEAR at any time to remove all displays from the screen and return to normal viewing.
Many VCR user manuals refer to a PROGRAM button. The MENU button on this remote works as a PROGRAM button in VCR mode. Other manuals may refer to a SELECT button. The OK button on this remote works as a SELECT button.
19