Transcend Information 25P Disconnecting from a Computer︱, Windows→ 2000, XP and Windows Vista

Page 13

Disconnecting from a Computer︱

Disconnecting from a Computer︱

NEVER disconnect the StoreJet from a Computer when its LED is flashing.

Windows→ 2000, XP and Windows Vista™

1.Select the Hardware icon on the system tray.

2.The Safely Remove Hardware pop-up window will appear. Select it to continue.

Figure 5: Safely Remove Hardware

3.A window will appear stating, “The ‘USB Mass Storage Device’ device can now be safely removed from the system.”

Figure 6: Safe to Remove Hardware

WARNING! To prevent data loss, always use this procedure to remove the StoreJet from Windows® 2000, XP and Vista.

Mac® OS 9.0 or Later

Drag and drop the Disk icon that represents your StoreJet 25 into the Trashcan. Then unplug your StoreJet 25 from the USB port.

11

Image 13

Contents StoreJet 25P User’s Manual Features︱ Package Contents︱Safety Precautions︱ PowerThe StoreJet 25 package includes the following items StoreJet 25P 1 Mini USB to 2 Standard-A USB cable USB Y cable Quick Start Guide Desktop or notebook computer with a working USB port Power Safety Precautions︱General Use Backing Up DataReminders Figure 1 StoreJet 25P Case Screw Mini USB PortInstalling a Hard Drive Installing a Hard Drive︱6. Reattach the case screw 5. Reattach the front cover and slide it back into placeFigure 3 Connecting to a Computer Connecting to a Computer︱Figure 2 Mini USB to Standard-A USB cable USB Y-cable 3. When the StoreJet 25 is successfully connected to a computer, the StoreJet’s Power LED will Disconnecting from a Computer︱ Figure 7 Drag StoreJet 25 drive icon into the Trashcan Linux Kernel 2.4 or LaterFormatting the Hard Drive︱ Figure 10 Format Complete Figure 9 Press “Start”7. The program will automatically detect the StoreJet 25 drive Figure 11 Run as administratorFigure 12 Allow Transcend’s StoreJet Format Utility to run in Vista Figure 13 The Utility will automatically detect the StoreJet 25 drive 8. Press “Start”Figure 14 Press “Start” 10. Click the “Close” button to finish and exit 8. Click the “Erase” button in the bottom right corner of the window Figure 17 Select a Volume Format file system9. Click “Erase” again to confirm Figure 18 Name your drive optional9. Type mkdir /mnt/usbdrive 10. Type mount /mnt/usbdrive 7. Type mkfs.ext3 /dev/sda1Figure 19 “Erase Disk” confirmation window Spare USB connector provides additional power Troubleshooting︱The Software CD does not auto-run in Windows My operating system cannot detect the StoreJetI cannot detect the StoreJet 25 on my Mac The StoreJet 25 does not Power-ONI cannot detect the StoreJet 25 in Linux Weight with hard drive Specifications︱Power Supply WarrantyTranscend Information, Inc Transcend Limited Warranty︱All logos and marks are trademarks of their respective companies