Transcend Information 25P user manual Installing a Hard Drive︱

Page 9

Installing a Hard Drive︱

Installing a Hard Drive︱

The StoreJet 25 hard drive enclosure only works with 2.5” SATA Hard Disk Drives.

Installing a Hard Drive

If you purchased a Transcend StoreJet 25 hard drive enclosure that does not have an SATA hard disk drive already installed, please read this section for installation instructions. If a hard drive is already installed, you can skip to the “Connecting to a Computer” section.

1.Use a small Phillips screwdriver to remove the case screw

2.Hold the case firmly between your palms and slide in opposite directions to remove the cover.

3.Place the hard drive (face up) into the case, with its SATA connectors facing the circuit board.

4.Gently push the hard drive onto the circuit board while making sure the SATA connectors are correctly aligned. Do NOT connect the hard drive at an angle.

7

Image 9

Contents StoreJet 25P User’s Manual Features︱ Package Contents︱Safety Precautions︱ PowerThe StoreJet 25 package includes the following items StoreJet 25P 1 Mini USB to 2 Standard-A USB cable USB Y cable Quick Start Guide Desktop or notebook computer with a working USB port Power Safety Precautions︱General Use Backing Up DataReminders Figure 1 StoreJet 25P Case Screw Mini USB PortInstalling a Hard Drive Installing a Hard Drive︱6. Reattach the case screw 5. Reattach the front cover and slide it back into placeConnecting to a Computer︱ Figure 3 Connecting to a ComputerFigure 2 Mini USB to Standard-A USB cable USB Y-cable 3. When the StoreJet 25 is successfully connected to a computer, the StoreJet’s Power LED will Disconnecting from a Computer︱ Figure 7 Drag StoreJet 25 drive icon into the Trashcan Linux Kernel 2.4 or LaterFormatting the Hard Drive︱ Figure 10 Format Complete Figure 9 Press “Start”Figure 11 Run as administrator 7. The program will automatically detect the StoreJet 25 driveFigure 12 Allow Transcend’s StoreJet Format Utility to run in Vista 8. Press “Start” Figure 13 The Utility will automatically detect the StoreJet 25 driveFigure 14 Press “Start” 10. Click the “Close” button to finish and exit 8. Click the “Erase” button in the bottom right corner of the window Figure 17 Select a Volume Format file system9. Click “Erase” again to confirm Figure 18 Name your drive optional7. Type mkfs.ext3 /dev/sda1 9. Type mkdir /mnt/usbdrive 10. Type mount /mnt/usbdriveFigure 19 “Erase Disk” confirmation window Spare USB connector provides additional power Troubleshooting︱The Software CD does not auto-run in Windows My operating system cannot detect the StoreJetThe StoreJet 25 does not Power-ON I cannot detect the StoreJet 25 on my MacI cannot detect the StoreJet 25 in Linux Weight with hard drive Specifications︱Power Supply WarrantyTranscend Information, Inc Transcend Limited Warranty︱All logos and marks are trademarks of their respective companies