Transcend Information 25P user manual Windows Vista, Press “Start”, Format Complete

Page 16

Figure 9: Press “Start”

Figure 9: Press “Start”

7.The format process may take a few minutes. When complete, an “O.K.” message will appear in the bottom right hand corner of the window.

Figure 10: Format Complete

8.Click the “Close” button to finish and exit.

Windows Vista™

1.Plug the StoreJet 25 into an available USB port on your Windows Vista™ computer.

2.Unplug all other USB storage devices from your computer. This is to prevent accidental format of a different USB drive.

3.Insert the included Software CD into your computer’s CD-ROM drive.

4.Open the “Software” folder of the Software CD.

5.Right-click “StoreJetFormatter.exe” and select “Run as Administrator.”

14

Image 16

Contents StoreJet 25P User’s Manual Package Contents︱ Features︱Safety Precautions︱ PowerThe StoreJet 25 package includes the following items StoreJet 25P 1 Mini USB to 2 Standard-A USB cable USB Y cable Quick Start Guide Desktop or notebook computer with a working USB port Safety Precautions︱ PowerGeneral Use Backing Up DataReminders Case Screw Mini USB Port Figure 1 StoreJet 25PInstalling a Hard Drive︱ Installing a Hard Drive5. Reattach the front cover and slide it back into place 6. Reattach the case screwFigure 3 Connecting to a Computer Connecting to a Computer︱Figure 2 Mini USB to Standard-A USB cable USB Y-cable 3. When the StoreJet 25 is successfully connected to a computer, the StoreJet’s Power LED will Disconnecting from a Computer︱ Linux Kernel 2.4 or Later Figure 7 Drag StoreJet 25 drive icon into the TrashcanFormatting the Hard Drive︱ Figure 9 Press “Start” Figure 10 Format Complete7. The program will automatically detect the StoreJet 25 drive Figure 11 Run as administratorFigure 12 Allow Transcend’s StoreJet Format Utility to run in Vista Figure 13 The Utility will automatically detect the StoreJet 25 drive 8. Press “Start”Figure 14 Press “Start” 10. Click the “Close” button to finish and exit Figure 17 Select a Volume Format file system 8. Click the “Erase” button in the bottom right corner of the window9. Click “Erase” again to confirm Figure 18 Name your drive optional9. Type mkdir /mnt/usbdrive 10. Type mount /mnt/usbdrive 7. Type mkfs.ext3 /dev/sda1Figure 19 “Erase Disk” confirmation window Troubleshooting︱ Spare USB connector provides additional powerThe Software CD does not auto-run in Windows My operating system cannot detect the StoreJetI cannot detect the StoreJet 25 on my Mac The StoreJet 25 does not Power-ONI cannot detect the StoreJet 25 in Linux Specifications︱ Weight with hard drivePower Supply WarrantyTranscend Limited Warranty︱ Transcend Information, IncAll logos and marks are trademarks of their respective companies