an available USB port. Connect the Power Adapter to the StoreJet™ 3.5 enclosure’s power jack and connect the power cable to the adapter, then turn on the unit’s power switch. The StoreJet™ 3.5’s LED will light up. The “New Hardware Found” dialogue box will appear.
Figure 11. Found New Hardware
5.The computer will automatically detect the StoreJet™ 3.5 and a new Local Disk drive with a newly assigned drive letter representing the StoreJet™ 3.5 will appear in the My Computer window.
Figure 12. *F is an example drive letter, the letter in your “My Computer” window may differ
Driver Installation for Windows Me, 2000 and XP
No drivers are required. These Windows® Operating Systems have
Driver Installation for Mac™ OS 9.0, or Later
No drivers are required. Plug your StoreJet™ 3.5 into an available USB port. Connect the Power Adapter to the StoreJet™ 3.5 enclosure’s power jack and connect the power cable to the adapter, then turn on the unit’s power switch and your computer will automatically detect it.
Driver Installation
Figure 13. Mac Driver Installation
Driver Installation for Linux™ Kernel 2.4, or Later
No drivers are required. Plug your StoreJet™ 3.5 into a USB port. Connect the Power Adapter to the StoreJet™ 3.5 enclosure’s power jack and connect the power cable to the adapter, then turn on the unit’s power switch and mount it.
1.First create a directory for the StoreJet™ 3.5. Example: mkdir /mnt/Storejet
2.Then, mount the StoreJet™ 3.5.
Example: mount
9