Status LED Summary

If overheating occurs, be sure	Once the unit has cooled the unit will revert to the
to correct the cause before	green “Standby” condition. To restore the unit to
continuing to use the 3-Phase	the blue “Operate” mode, simply press the front
Power Supply.	panel button.

Red Warmup / Brownout – The low-distortion oscillator is stabilizing after the unit is first powered on. The indicator will also glow red if the AC line voltage drops below about 80% of normal.

Green Standby – The power supply is ready to enter “Operate” mode.

Blue Operate (33-1/3rpm) – The turntable is running at 33-1/3rpm.

Violet Operate (45 rpm) – The turntable is running at 45 rpm.

Orange Over Temperature – The motor-drive amplifiers has exceeded their safe operating temperatures due to poor ventilation. The unit will automatically revert to “Standby” (green) when it has cooled. Be sure to correct the problem before continuing to use the power supply.

Flashing Violet Configuration Mode – The unit has been placed into the “Configuration Mode”. Please refer to the chapter “Optimization and Customization” for additional details. It will automatically revert to “Standby” (green) after ten seconds.