American Power Conversion AP8841 Warranty and Service, Limited warranty, Warranty limitations

Page 19

Warranty and Service

Limited warranty

APC warrants the Switched Rack PDU to be free from defects in

 

materials and workmanship for a period of two years from the date of

 

purchase. Its obligation under this warranty is limited to repairing or

 

replacing, at its own sole option, any such defective products. This

 

warranty does not apply to equipment that has been damaged by

 

accident, negligence, or misapplication or has been altered or modified

 

in any way. This warranty applies only to the original purchaser.

Warranty limitations

Except as provided herein, APC makes no warranties, express or

 

implied, including warranties of merchantability and fitness for a

 

particular purpose. Some jurisdictions do not permit limitation or

 

exclusion of implied warranties; therefore, the aforesaid limitation(s) or

 

exclusion(s) may not apply to the purchaser.

 

Except as provided above, in no event will APC be liable for direct,

 

indirect, special, incidental, or consequential damages arising out of

 

the use of this product, even if advised of the possibility of such

 

damage.

 

Specifically, APC is not liable for any costs, such as lost profits or

 

revenue, loss of equipment, loss of use of equipment, loss of software,

 

loss of data, costs of substitutes, claims by third parties, or otherwise.

 

This warranty gives you specific legal rights and you may also have

 

other rights, which vary according to jurisdiction.

Obtaining service

To obtain support for problems with your Switched Rack PDU:

 

1. Note the serial number and date of purchase. You can locate the

 

serial number on the bottom of the Switched Rack PDU.

 

2. Contact Customer Support at a phone number on the back cover of

 

this document. A technician will try to help you solve the problem

 

by phone.

 

3. If you must return the product, the technician will give you a return

 

material authorization (RMA) number. If the warranty expired, you

 

will be charged for repair or replacement.

 

4. Pack the unit carefully. The warranty does not cover damage

 

sustained in transit. Enclose a letter with your name, address, RMA

 

number and daytime phone number; a copy of the sales receipt;

 

and a check as payment, if applicable.

 

5. Mark the RMA number clearly on the outside of the shipping

 

carton.

 

6. Ship by insured, prepaid carrier to the address provided by the

 

Customer Support technician.

Switched Rack PDU Installation and Quick-Start Manual

15

Image 19
Contents Switched Rack Power Distribution Unit Page Contents How to Download Firmware Updates Warranty and Service Preliminary Information Receiving inspection AdditionalDocumentation InventoryAttach the cord Install the Switched Rack PDUInstallation guidelines How to attach cords to the trayInstall the Switched Rack PDU Placing one in each corner Install using the rubberConnection procedures Feet providedOverview TCP/IP configuration methods Quick ConfigurationBootp the default setting Option enabled, you can use apc for both the user namePassword to access the Switched Rack PDU through ConfigurationSee also section in the Addendum Option 43 = 01 04 31 41 50 43 where Remote access to Local access toControl console If you disconnected a cable during the procedure Control console on page 10 or Remote access to the controlIf you are not using a Bootp or Dhcp server to configure Will take effect when you log outWeb interface OverviewTelnet How to Recover From a Lost Password Xmodem How to Download Firmware UpdatesObtaining service Warranty and ServiceLimited warranty Warranty limitationsDevices Life-Support PolicyGeneral policy Examples of life-supportPage Page Radio Frequency Interference APC Worldwide Customer Support