American Power Conversion BK400EI, BK600EI Specifications, Input, 10.2TransferCharacteristics

Page 35

10.0Specifications

10.1Input

Nominal input voltage: single phase 230 Vac.

Nominal input frequency: 50 or 60 Hz, selected by option switch #4.

10.2TransferCharacteristics

Frequency limits for on-line operation: ±5% of the nominal 50 or 60 Hz.

Low input voltage limit for on-line operation: 196 Vac., may be set lower.

10.3OutputCharacteristics

Maximum load: 250 VA or 170 W, 400 VA or 250 W, and 600 VA or 400 W for models 250, 400 and 600 respectively.

Nominal output voltage: 225 Vac, ±5%. When verifying UPS on-battery output voltage, use only a true rms responding voltmeter.

Frequency regulation: 50 or 60 Hz, ±3% unless synchronized to the utility.

Waveshape: stepped approximation to sine wave; peak and rms values equivalent to the utility.

Protection: electronically overcurrent and short circuit protected, overload shutdown is latched.

10.4Batteryandcharger

Battery type: maintenance free lead-acid, sealed and leakproof.

Typical service life: 3-6 years, dependent on number of discharges, temperature.

Low battery signalling: > 2 minute audible tone, interface port signal.

Recharge time: 6 to 10 hours, dependent on load and length of utility outage.

Page 33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents APC Back-UPS Pleasesaveorrecyclethepackagingmaterials ImportantSafetyInstructionsPleasesavethismanual TableofContents 1Overview 2Userreplaceablebattery3Optionswitches 0Introduction6Remoteinterface Test / Alarm Disable switch5SurgesuppressionandEMI/RFIfiltering 0Safety 0Sécurité!Françias Vorsicht 0Sicherheit!Deutsch¡Atencion ¡Seguridad!Español3Loadtypes 0Installation2Placement 1Receivinginspection5Batterycharging 4ConnectingtotheUtilityConnecting Your Equipment to the UPS Example labels found at system equipment rear panels 8Overloads Test for Proper Operation0PrinciplesofOperation Noise and surge suppression 5Inverter 2Loadtransferswitch3BatteryCharger 4Battery8Operationduringautilityfailure 6TransformerMonitoring and control electronics Page 3Audiblealarm ControlsandindicatorsPower I/0 switch Test/Alarm Disable switch on units so equippedOption Switch #2 and #3 4OptionSwitchesOption Switch #1 Option Switch #4 Option Switch #2 Switch #3 Undervoltage Transfer0UPSmonitoring 2PowerChuteSoftware600VAonly3ComputerInterfacePort600VAonly 0Difficulty Françias 0Difficulté0SchwierigkeitDeutsch ¡Cuidado 0Dificultad EspañolMo r 1TroubleshootingChart1TroubleshootingChart 2ReplacingtheBattery 3ObtainingService 2ExtendedStorage StoringtheUPSStorageConditions 0RunTimeVersusLoad 10.4Batteryandcharger Specifications10.2TransferCharacteristics 10.3OutputCharacteristicsSurge and noise suppression 10.6OperatingenvironmentandphysicaldimensionsDeclaration of Conformity LimitedWarranty Page Serial number

K250EI, BK400EI, BK600EI specifications

American Power Conversion (APC) is renowned for its innovative power management solutions, and its uninterruptible power supplies (UPS) are a testament to this commitment. Among their product lineup, the BK600EI, BK400EI, and K250EI models are popular choices designed to provide reliable power protection to various devices and systems.

The BK600EI is a 600VA UPS, ideal for protecting office equipment, personal computers, and networking devices. One of its standout features is the line-interactive technology, which provides voltage regulation during brownouts and surges. This model also supports an LCD display that offers real-time data on battery status, load capacity, and input voltage, enabling users to monitor their power environment easily. Additionally, the BK600EI has a compact design, making it suitable for space-limited areas.

Conversely, the BK400EI is a slightly lower-capacity model, rated at 400VA, making it an excellent option for smaller systems or devices with lower power requirements. Similar to the BK600EI, it employs line-interactive technology, ensuring continuous operation even during power fluctuations. This model is designed with automatic shutdown software that protects devices from data loss during power outages, a critical feature for businesses that rely on information stability and integrity.

The K250EI stands out with its 250VA capacity, catering to entry-level applications. This model is perfect for those needing basic power protection for devices such as routers, modems, or small desktop computers. The K250EI is designed with overload protection, ensuring that devices are safeguarded against electrical surges and overload conditions. The LED indicators provide a quick visual reference for the unit's operational status, reducing user effort in monitoring performance.

All three models share essential characteristics, such as a compact footprint, user-friendly interfaces, and advanced battery management technologies that improve longevity and efficiency. They also come equipped with multiple outlets to ensure users can connect various devices simultaneously. Furthermore, each model is engineered to minimize the environmental impact, boasting energy-efficient designs that contribute to reduced power consumption.

In conclusion, the APC BK600EI, BK400EI, and K250EI UPS models exemplify affordable and effective power management solutions. With their high-quality features, advanced technologies, and protective characteristics, they are well-suited for home offices, small businesses, or individual users seeking reliable power backup and protection.
Top Page Image Contents