American Power Conversion Master Switch manual Network, Tcp/Ip

Page 25

Menu Items

Network

TCP/IP

Item

Description

 

 

System IP

The IP address of the unit

 

 

Subnet Mask

The network subnet mask

 

 

Default Gateway

The local default gateway (router address)

 

 

BOOTP

Enables or disables BOOTP requests for

TCP/IP settings at startup.

 

 

 

TFTP/FTP

Item

Definition

 

 

 

 

TFTP Client

 

 

 

 

 

Remote Server IP

The network address of the TFTP server

 

used for downloads.

 

 

 

 

 

 

FTP Client

 

 

 

 

 

Remote Server IP

The network address of the FTP server

 

used for downloads.

 

 

 

 

 

 

User Name

The user name for access to the FTP

 

server.

 

 

 

 

 

 

Password

The password for access to the FTP

 

server.

 

 

 

 

 

 

FTP Server

 

 

 

 

 

Access

Enable or Disable FTP server access.

 

 

 

 

 

The TCP/IP port on which the FTP server

 

Port

for the Management Card is located.

 

 

Default: port 21

 

 

 

 

 

Continued on next page

MasterSwitch VM User’s Guide

20

Image 25
Contents MasterSwitch VM Thank You Contents MasterSwitch VMContents Troubleshooting Warranty InformationSpecifications Life-Support PolicyIntroduction Feature DescriptionProduct Description Introduction MasterSwitch VM ControllerStatus Description LEDsOperating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Outlets always turn on Outlets do not turn on when the Overload WarningThreshold has been exceeded Overload Warning and the load exceeds the Overload WarningManagement Interfaces Managing MasterSwitch VMControl Console Managing MasterSwitch VMInterface Telnet, for remote managementManaging MasterSwitch VM Account access to Password-Protected AccountsAccount, and up to 16 Outlet User accounts Outlets and menuOutlets Menu ItemsOutlets Menu ItemsUnit Configuration MasterSwitch VM Outlet Configuration Links Interface or by pressing C TRL + L in the Control Console Event LogDir. You will see a listing similar to the following ftpdir Representation when logging and displaying event data MasterSwitch VM unit always uses four-digit yearSimilar to the following However, you may need to select a four-digit date formatTCP/IP NetworkTelnet/Web Snmp Access ControlDefinition Trap Receiver IP to Snmp Trap ReceiverUser Manager SystemItems Manager Outlet UserFor Outlet User Manager Date/Time IdentificationFile Transfer Tools Enable BootpHelp Security Security FeaturesSecurity AuthenticationMethods Interface Security AccessProduct Information Warranty InformationProduct Information TroubleshootingLife-Support Policy Following table shows the product specifications for SpecificationsMasterSwitch VM power distribution unit AP9221X166 ProductAP9221NX166 MasterSwitch VM Controller AP9221NX166Index Help FeaturesIndex Outlet Access Outlet operationsRegional centers APC Worldwide Customer Support