American Power Conversion Master Switch manual Telnet/Web, Snmp Access Control, Definition

Menu Items

Network continued

Telnet/Web

Item

Definition

Telnet
Access	Enables or Disables Telnet Access.
	The TCP/IP port where the Telnet server for the MasterSwitch VM
Port	unit is located.
	Default: port 23
Web
Access	Enables or Disables Web Access.
	The TCP/IP port where the Web server for the MasterSwitch VM
Port	unit is located.
	Default: port 80

SNMP	.
		Item	Definition
		SNMP Access	Enables or disables SNMP access.
		Access Control	Controls access to each of the four SNMP channels.
		Trap Receiver	Defines the NMSs (up to 4) to which traps are sent.

SNMP: Access Control

Item		Definition
Community	The password that the NMS (identified by the NMS IP option) must use
	for SNMP access to MasterSwitch VM. The allowed access type is
Name
	defined by the Access Type option (15 characters maximum).
	Limits access to the NMS or NMSs specified. You specify the value as a
	specific IP address for one NMS or as an IP address filter for multiple IP
	addresses. For example:
	• 159.215.12.1 allows only the NMS with the specific IP address of
NMS IP	159.215.12.1 to have access.
	• 159.215.12.255 allows access for any NMS on the 159.215.12
	segment.
	• 159.215.255.255 allows access for any NMS on the 159.215 segment.
	• 159.255.255.255 allows access for any NMS on the 159 segment.
	• 0.0.0.0 or 255.255.255.255 allows access for any NMS.
Access	Defines whether an NMS	(identified by the NMS IP option) has Write
	access (can GETs and SETs), has Read access (can only GETs), or is
Type
	Disabled (cannot use GETs or SETs).

Continued on next page

MasterSwitch VM User’s Guide 21