American Power Conversion Master Switch manual LEDs, Status Description

Page 8

Introduction

Product Description continued

LEDs

	LED	Status	Description

	MasterSwitch VM	On	The Outlet is on.
	Outlets
	Outlets	Off	The Outlet is off.
	page 1, Item 3	Off	The Outlet is off.
	page 1, Item 3

		Off	The unit has no power.

	MasterSwitch VM	Green	The unit is operating under normal load
		Green	conditions.
			conditions.
	Overcurrent Alarm
	Overcurrent Alarm	Flashing	The unit is approaching its maximum load.
		Flashing	The unit is approaching its maximum load.
	page 1, Item 7	green	(Warning threshold exceeded)

		Solid red	The unit has exceeded its maximum load.
		Solid red	(>100%)
			(>100%)

	MasterSwitch VM	On	The Controller has power.
	Controller
	Controller
	Front Status	Off	The Controller has no power.
		Off	The Controller has no power.
	page 2, Item 1

		Off	The unit has no power.

		Solid green	The unit has valid network settings.
	MasterSwitch VM
	MasterSwitch VM	Flashing	The unit does not have valid network
	Controller	Flashing	The unit does not have valid network
	Controller	green	settings.
	Rear Status	green	settings.
	Rear Status
	page 2, Item 6	Solid red	A hardware failure has been detected in the
		Solid red	unit.
			unit.

		Blinking	The unit is making BOOTP requests.
		Red (Slow)	The unit is making BOOTP requests.
		Red (Slow)

	MasterSwitch VM		The device which connects the unit to the
	MasterSwitch VM	Off	network (whether a router, hub, or
	Controller Rear	Off	concentrator) is off or not operating
	Controller Rear		concentrator) is off or not operating
	Link-RX/TX		correctly.

	page 2, Item 7	Flashing	The unit is receiving data packets from the
		Green	network.

MasterSwitch VM User’s Guide

3

Image 8

Contents MasterSwitch VM Thank You MasterSwitch VM ContentsContents Warranty Information Troubleshooting Specifications Life-Support PolicyProduct Description Feature DescriptionIntroduction MasterSwitch VM Controller IntroductionLEDs Status DescriptionOperating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Outlets do not turn on when the Overload Warning Outlets always turn onThreshold has been exceeded Overload Warning and the load exceeds the Overload WarningManaging MasterSwitch VM Management InterfacesManaging MasterSwitch VM Control ConsoleInterface Telnet, for remote managementManaging MasterSwitch VM Password-Protected Accounts Account access toAccount, and up to 16 Outlet User accounts Outlets and menuMenu Items OutletsMenu Items OutletsMasterSwitch VM Unit ConfigurationOutlet Configuration Links Dir. You will see a listing similar to the following ftpdir Event LogInterface or by pressing C TRL + L in the Control Console MasterSwitch VM unit always uses four-digit year Representation when logging and displaying event dataSimilar to the following However, you may need to select a four-digit date formatNetwork TCP/IPDefinition Snmp Access ControlTelnet/Web Snmp Trap Receiver Trap Receiver IP toItems SystemUser Manager For Outlet User Manager Outlet UserManager File Transfer IdentificationDate/Time Enable Bootp ToolsHelp Security Features SecurityAuthentication SecurityInterface Security Access MethodsWarranty Information Product InformationTroubleshooting Product InformationLife-Support Policy Specifications Following table shows the product specifications forMasterSwitch VM power distribution unit AP9221X166 ProductMasterSwitch VM Controller AP9221NX166 AP9221NX166Help Features IndexOutlet Access Outlet operations IndexAPC Worldwide Customer Support Regional centers