American Power Conversion AP7608 Warranty and Service, Limited warranty, Warranty limitations

Page 21

Warranty and Service

Limited warranty

APC warrants the PDU to be free from defects in materials and

 

workmanship for a period of two years from the date of purchase. Its

 

obligation under this warranty is limited to repairing or replacing, at its

 

own sole option, any such defective products. This warranty does not

 

apply to equipment that has been damaged by accident, negligence, or

 

misapplication or has been altered or modified in any way. This

 

warranty applies only to the original purchaser.

Warranty limitations

Except as provided herein, APC makes no warranties, express or

 

implied, including warranties of merchantability and fitness for a

 

particular purpose. Some jurisdictions do not permit limitation or

 

exclusion of implied warranties; therefore, the aforesaid limitation(s) or

 

exclusion(s) may not apply to the purchaser.

 

Except as provided above, in no event will APC be liable for direct,

 

indirect, special, incidental, or consequential damages arising out of

 

the use of this product, even if advised of the possibility of such

 

damage.

 

Specifically, APC is not liable for any costs, such as lost profits or

 

revenue, loss of equipment, loss of use of equipment, loss of software,

 

loss of data, costs of substitutes, claims by third parties, or otherwise.

 

This warranty gives you specific legal rights and you may also have

 

other rights, which vary according to jurisdiction.

Obtaining service

To obtain support for problems with your PDU:

 

1. Note the serial number and date of purchase. The serial number is

 

located on the bottom of the PDU.

 

2. Contact Customer Support at a phone number located on the back

 

cover of this manual. A technician will try to help you solve the

 

problem by phone.

 

3. If you must return the product, the technician will give you a return

 

material authorization (RMA) number. If the warranty expired, you

 

will be charged for repair or replacement.

 

4. Pack the unit carefully. The warranty does not cover damage

 

sustained in transit. Enclose a letter with your name, address, RMA

 

number and daytime phone number; a copy of the sales receipt;

 

and a check as payment, if applicable.

 

5. Mark the RMA number clearly on the outside of the shipping

 

carton.

 

6. Ship by insured, prepaid carrier to the address provided by the

 

Customer Support technician.

Three-Phase Rack PDU — Installation and Operation Manual

17

Image 21
Contents Three-Phase Rack Power Distribution Unit Page Contents Page Product Description and Inventory DescriptionInventory AP7601AP7602AP7608 How to Install the Rack PDUs Installation guidelinesMounting options Toolless mounting Into the bottom holes in the enclosureLocks into position Bracket-mounting Rack PDU to be mounted flush with the enclosure a raisedHead screws provided in the bracket kit for each bracket Recessed Orientation Raised Orientation How to configure ConfigurationPDU through a serial PortStatus Information Device Data option Device Data, main menu option 3, has the following settingsLogout option Factory Data optionSystem Management OptionDisplay interface OperationAlarm conditions Using a serial port connectionRack PDU shows warning and alarm conditions as follows Hardwiring procedure optional Wiring OptionsWiring Options Electrical SpecificationsXmodem How to Download Firmware UpdatesLimited warranty Warranty and ServiceWarranty limitations Obtaining servicePage Radio Frequency Interference APC Worldwide Customer Support