Operation
Display interface
Control button:
•Press to change the phase of the current displayed on the digital display.
•Press and hold for five seconds to view the orientation; hold for an additional five seconds to change the orientation.
•Press to silence an alarm.
Display of the current used by the PDU and attached devices:
•Shows the aggregate current for the phase corresponding to the Phase Indicator LED that is illuminated.
•Cycles through all three phases in
Serial port: Access internal menus by connecting this port
Phase indicator LEDs:
•Indicates the phase corresponding to the current listed in the digital display.
•Indicates normal (green), warning (yellow) or alarm (red) condition.
Status LED: Indicates the status of the network connection and the state of the PDU.
Ethernet Port: Connects the PDU to the InfraStruXure network, using a
Link LED: Indicates whether there is activity on the network.
11 |