American Power Conversion AP7601 Toolless mounting, Into the bottom holes in the enclosure

Page 8

How to Install the Rack PDUs

Toolless mounting	1.	Slide the mounting pegs into the holes provided in the channel in
		the rear panel of the enclosure. Make sure the bottom pegs slide
		into the bottom holes in the enclosure.
	2.	Snap the Rack PDU into place by pushing it downward until it
		locks into position.

4	Three-Phase Rack PDU — Installation and Operation Manual

Image 8

Contents Three-Phase Rack Power Distribution Unit Page Contents Page Inventory Product Description and InventoryDescription AP7601AP7602AP7608 Mounting options How to Install the Rack PDUsInstallation guidelines Locks into position Toolless mountingInto the bottom holes in the enclosure Head screws provided in the bracket kit for each bracket Bracket-mountingRack PDU to be mounted flush with the enclosure a raised Recessed Orientation Raised Orientation Configuration How to configurePDU through a serial PortStatus Information Device Data, main menu option 3, has the following settings Device Data optionFactory Data option Logout optionSystem Management OptionOperation Display interfaceRack PDU shows warning and alarm conditions as follows Alarm conditionsUsing a serial port connection Wiring Options Hardwiring procedure optionalWiring Options Specifications ElectricalHow to Download Firmware Updates XmodemWarranty and Service Limited warrantyWarranty limitations Obtaining servicePage Radio Frequency Interference APC Worldwide Customer Support