APC UPS user manual Storage, Replacing the Battery Module

Page 10

4:STORAGE, MAINTENANCE, AND TRANSPORTING

Storage

Store the UPS covered and positioned as for proper functioning, in a cool, dry location, with the bat- teries fully charged.

At -15 to +30 °C (+5 to +86 °F), charge the UPS battery every six months.

At +30 to +45 °C (+86 to +113 °F), charge the UPS battery every three months.

Replacing the Battery Module

This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on for this proce- dure. See your dealer or contact APC at the web site, www.apc.com/support for information on re- placement battery modules.

Once the battery is disconnected, the connected equipment is not protected from power outages.

Be careful during the following steps-the battery module is heavy.

REMOVING THE FRONT BEZEL AND BATTERY MODULE

Step 1

 

Step 2

 

 

 

 

 

 

 

 

 

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents APC Smart-UPS Page Unpacking IntroductionPositioning the UPS Connecting Equipment and Power to the UPS Plug in the battery connector nPower management software and interface kits can be used Operation On Battery Operation User Configurable Items Off Replacing the Battery Module Storage1500VA Model Disconnecting the Battery for Transport Troubleshooting 120V models only Utility Voltage Service Contacting APCRegulatory Agency Approvals and Radio Frequency Warnings 230V ModelsDeclaration of Conformity Limited Warranty
Top Page Image Contents