Introduction
About Your New UPS
This Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags and surges from reaching your computer and other valuable electronic equipment. This UPS also filters out small utility line fluctuations and isolates your equipment from large disturbances by internally disconnecting from the utility line, while supplying power from its external batteries until the utility line returns to safe levels.
Unpacking
Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.
Contents
The shipping package contains the UPS, four IEC jumper cords, one C19 jumper cord, and a cable assembly to connect the battery.
Caution:
The 5000 VA model must be moved by a forklift due to its weight.
Installation
Installing your UPS requires six steps:
1.Position the UPS in the desired location..
2.Hardwire the electrical connections on the input and output sides (must be done by an authorized electrician).
3.Connect the external batteries (UXBP48M or equivalent fused battery packs are recommended).
4.Power up the UPS.
5.Install PowerChute UPS monitoring software and accessories.
6.Program the UPS with the number of external battery packs connected.
1.Position the UPS
Placement
Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Do not operate the UPS where the temperature and humidity are outside the specified limits.
Warning!
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the warranty.
•UPS are heavy. Select a location sturdy enough to handle the weight.
•Select a location with adequate air flow that is free from excessive dust. Ensure that any air vents on the sides of the UPS are not blocked.
•Do not operate the UPS where temperature is outside 0 to 40ΓC (+32 to +104ΓF) or humidity is outside.0 to 95%,
1