REINSTALLING THE BATTERY TRAYS AND ATTACHING THE FRONT BEZEL
|
|
|
| 1. | Supporting the battery tray on the bottom, align | ||
|
|
|
|
|
| it with the battery pack opening and slide the | |
|
|
|
|
|
| tray into the compartment. | |
|
|
|
| 2. | Replace the two screws to secure the battery | ||
|
|
|
|
|
| pack face plate. | |
|
|
|
| 3. | Locate the battery cables Πand the UPS bat- | ||
|
|
|
|
|
| tery connector jacks • to the right of each bat- | |
|
|
|
|
|
| tery tray. | |
|
|
|
|
| 4. | To connect the battery connector plug to the | |
|
|
|
|
|
| battery jack, push the plug into the jack so the | |
Œ | • | Œ | • | ||||
metal pieces inside each part are touching. | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
| Press firmly to ensure a tight connection. You | |
|
|
|
|
|
| will hear a “snap” when the connector is seated | |
|
|
|
|
|
| properly. | |
|
|
|
| 5. | Push the battery cables and white cord as close | ||
|
|
|
|
|
| to the battery tray as possible. | |
|
|
|
| 6. | The battery pack is shipped with the front bezel | ||
|
|
|
|
|
| removed (it is packaged separately within the | |
|
|
|
|
|
| main box). | |
Unpack the bezel and hold it with the cutout section on the right. Align the tabs on the side of the bezel with the slots on the front of the battery pack and gently snap it into place.
CONNECTING A BATTERY PACK TO THE
Battery pack connectors are
Allow the battery pack to charge for 24 hours. Do not expect full run time during this initial charge period.
| 1. Remove the rear connector plug from the |
Œ | UPS Œ. |
6