American Power Conversion 5000 VA user manual Normal bypass

Page 6

BASIC CONNECTORS

 

 

 

 

 

 

 

The serial connector is to be used for interfacing with APC PowerChute

 

 

 

 

 

 

 

software and terminal emulation software.

serial com

 

 

Use only cables approved by APC.

 

 

 

 

 

 

 

Any other interface cable will be incompatible with the UPS

 

 

 

 

 

 

 

connector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual bypass enables the user to manually put connected equipment into

 

 

 

 

 

 

 

 

 

 

 

 

bypass mode.

normal bypass

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Emergency Power Off terminal allows the user to connect the UPS to the

 

 

 

 

 

 

 

 

 

 

 

 

central EPO system.

EPO terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The UPS features a transient voltage surge-suppression (TVSS) screw for

 

 

 

 

 

 

 

 

 

 

 

 

connecting the ground lead on surge suppression devices such as telephone

TVSS screw

 

 

and network line protectors.

 

 

When connecting grounding cable, disconnect the unit from the utility

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optional external battery packs provide extended run time during power

 

 

 

 

 

 

 

 

 

 

 

 

 

outages. These units support up to ten external battery packs.

external battery

 

 

 

See the APC Web site, www.apc.com for the information on the external

pack connector

 

 

battery pack, SURT192XLBP.

 

 

 

 

5000 VA

 

 

 

XLI models

 

 

 

 

 

 

 

 

 

 

 

output circuit breakers

3000/5000VA

XLJ/XLT/XLTW models

output circuit breakers

4

Image 6
Contents APC Smart-UPSRT Page Specifications Introduction Unpacking Wiring and Connecting the UPS Connecting the Battery Modules and Attaching the Front Bezel Normal bypass Avoid using extension cords Operation Does not affect the voltage display User Configurable Items XLJ models Connecting the EPO Emergency Power OFF Option Terminal Mode to Configure UPS Parameters VA models Page Replacing the Battery Module Disconnecting the Battery for Transport TROUBLESHOOTING, SERVICE, and Warranty Information Bypass LED Illuminates Service Limited WarrantyRegulatory Agency Approvals and Radio Frequency Warnings 200, 208, 220, 230, 240 V ModelsDeclaration of Conformity APC Worldwide Customer Support