American Power Conversion 5000 VA user manual Does not affect the voltage display

Page 9

Feature

Function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cold Start

When there is no utility power and the UPS is off, press and hold the

 

 

button to

 

 

 

 

 

 

 

 

power up the UPS and connected equipment.

 

 

 

 

 

 

 

The UPS will emit two beeps. During the second beep, release the button.

 

 

 

 

 

 

 

 

 

 

 

 

Self-Test

Automatic: The UPS performs a self-test automatically when turned on, and every

 

 

 

two weeks thereafter (by default). During the self-test, the UPS briefly operates the

 

 

 

connected equipment on battery.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual: Press and hold the

 

button for a few seconds to initiate the self-test.

 

 

 

 

 

 

 

 

 

 

 

 

 

Diagnostic Utility Voltage

The UPS has a diagnostic feature that displays the utility voltage. Plug

 

 

 

 

 

the UPS into the normal utility power.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The UPS starts a self-test as part of this procedure. The self-test

 

 

 

 

 

does not affect the voltage display.

 

 

 

 

 

 

 

 

 

Press and hold the

 

button to view the utility voltage bar graph

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display. The five-LED, Battery Charge

 

display on the right of the

 

 

 

 

 

 

 

 

 

 

 

front panel shows the utility input voltage.

 

 

 

 

 

 

 

 

 

Refer to the figure at left for the voltage reading (values are not listed

 

 

 

 

 

on the UPS).

 

 

 

 

 

 

 

 

 

 

 

 

The display indicates the voltage is between the displayed value on the

 

 

 

 

 

list and the next higher value.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Image 9
Contents APC Smart-UPSRT Page Specifications IntroductionUnpacking Wiring and Connecting the UPS Connecting the Battery Modules and Attaching the Front Bezel Normal bypass Avoid using extension cords Operation Does not affect the voltage display User Configurable Items XLJ models Connecting the EPO Emergency Power OFF Option Terminal Mode to Configure UPS Parameters VA models Page Replacing the Battery Module Disconnecting the Battery for Transport TROUBLESHOOTING, SERVICE, and Warranty Information Bypass LED Illuminates Limited Warranty Service200, 208, 220, 230, 240 V Models Regulatory Agency Approvals and Radio Frequency WarningsDeclaration of Conformity APC Worldwide Customer Support