APC SMX2200RMHV2U, 200-240 V Rear panel, Operating Conditions, Environmental Specifications

Page 4

Rear panel

SmartSlot

Controllable Outlet Group 3

UPS input

External battery pack connector

Ground screw

EPO connector

Controllable Outlet Group 1

Serial port

Controllable Outlet Group 2

USB port

2200 VA Low Voltage

2000 VA Low Voltage

su0494a

su0492a

3000 VA Low Voltage

2200/3000 VA High Voltage

su0495a

su0493a

Specifications

Operating Conditions

This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the UPS and XLBP.

Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the specified limits.

This unit has front and rear air vents. Allow adequate space for proper ventilation.

Environmental Specifications

Environmental factors impact battery life. High temperatures, poor utility power, and frequent, short duration discharges will shorten battery life.

For additional specifications, see the APC Web site at www.apc.com.

Temperature

Operating

0° to 40° C (32° to 104° F)

 

 

Storage

-15° to 45° C (5° to 113° F)

 

 

charge UPS battery every six months

 

 

 

Maximum

Operating

3,000 m (10,000 ft)

Elevation

 

 

Storage

15,000 m (50,000 ft)

Humidity

0% to 95% relative humidity, non-condensing

2

Smart-UPS X 2000/2200/3000 VA

Image 4
Contents Smart-UPSX Page Safety OverviewAbout the UPS Product OverviewSpecifications Environmental SpecificationsRear panel Operating ConditionsInstallation Network Management Card External Battery PackConnect Equipment to the UPS OperationBasic Connections Using the display interface Display InterfaceOverview Menu OverviewSmart-UPS X 2000/2200/3000 VA About Configuration UPS SettingsStart-up Settings Function Factory Default Options DescriptionGeneral Settings Audible Alarm Interval SettingReset to Factory No DefaultUsing the Switched Outlet Groups Switched Outlet GroupsCustomize the Switched Outlet Groups Network Management Card Settings Emergency Power Off EPO OverviewNormally open contacts Normally closed contactsTroubleshooting UPS does not provide expected backup timeReplace battery indicator is illuminated Display interface has a Site Wiring Fault messageService Service and SupportTransport the unit Smart-UPS Factory Warranty Page APC Worldwide Customer Support 990-3651C 09/2011