System Configuration
The basic 8510C measurement system configura- tion needed for test port flatness correction is shown in Figure 1. A single channel power meter such as the Agilent 437B, E4418A, or E4418B is required, along with a compatible sensor, for per- forming the power flatness calibration. Power meters with the 437B command set must be used for the power level flatness correction.
| 85107B Measurement System | |
| 8510C network analyzer | |
| 8517B test set | |
bus |
| |
system | 8485A | |
power sensor | ||
| ||
8510 | E4418B | |
power meter | ||
| ||
| 83651B | |
| synthesized sweeper |
Figure 1. Basic Agilent 85107B measurement system con- figuration for test port flatness correction
The Agilent 8511B frequency converter test
set may be used with the test port power flatness- correction feature. The range of the test port power is determined by the available power of the 8360 source and the insertion loss of the com- ponents added to the measurement system.
3