Anton/Bauer HyTRON 140, HyTRON 50, HyTron 100 owner manual

Page 15

5.Routine use of a battery at discharge rates greater than the battery rating (e.g. >50w for Hytron 50) can reduce overall service life. Always select the proper size battery for your application.

6.Discharging the battery for diagnostic purposes should only be performed on an occasional basis (once every 6-8 weeks at most). Unnecessary discharging only detracts from overall life.

7.Periodic cleaning of both the charger terminals and battery terminals will ensure continued reliable operation. Dirty terminals may cause the battery to indicate a steady red (“Hold”) mode on the charger. Clean the terminals with a pencil eraser or lightly scrape the surface with a blunt instrument to help reduce this situation.

Anton/Bauer publishes a comprehensive “Video Battery Handbook” to help you further understand the care and use of video batteries. This guide is available at no charge by contacting Anton/Bauer at 1-800- 422-3473 or 203-929-1100 or fax 203-929-9935.

13

Image 15
Contents HyTRON Table of Contents Revision 3.4 or HIGHER. Old model Interactive Introduction Features Page High Voltage Design Charging with Logic Series Interactive Chargers OVER-DISCHARGED Batteries Remaining Runtime Hours Minutes Side Bars Page Page Preventative Maintenance Guidelines for Optimum Performance Maximum Life Page Specifications ServiceLimited Warranty Page Worldwide standard→