Anton/Bauer DUAL 2722 owner manual Introduction, Features

Page 4

INTRODUCTION

The DUAL 2722 is a simultaneous 2 position Interactive 2000 PowerCharger fast charger with 70 watt DC camera power supply. It incorporates all of the Logic Series circuits that are employed in every Anton/Bauer charger. The InterActive charge programming provides all charge termination and protection routines for safe, reliable, chemistry independent charging.

Like all Anton/Bauer chargers, everything is automatic. Once a battery is placed onto the charger, it will automatically go into one of the Three Stage Charging modes. The left side of the charger is dedicated to charging, while the right side operates simultaneously as selected between charging or operating as a camera power supply.

FEATURES

-Two independent 70 Watt Power Supplies – one for charging or DC power, and one exclusively for charging.

-Fast Charging. One hour with most batteries (approximately 2 hours with HyTRON series and 3 hours with Dionic batteries).

-Multifunction LCD displays critical battery and charger data automatically.

-Regulated DC power supply output for camera operation from AC mains, eliminating the need for a separate bulky power supply.

-Wide range mains input compatibility (90-250 VAC 50-60 Hz) automatically adapts to any mains source worldwide.

-Six (6) Independent Charge Termination Systems.

-Lightweight (2.75lbs.)

-Slim, ultra-lightweight design for easy portability.

-Serial output port for printer and PC interface.

1

Image 4
Contents PowerCharger Dual Page Table of Contents Features IntroductionSafeguards GROUNDING/EARTHINGCharging ApplicationsThree Stage Charging Methodology LED Indications LED Indication MeaningPropac Wait 2-READYVCO DDM DIAGNOSTIC/DISCHARGE Module To Operate The DDM Autocal Feature Operation AS DC Camera Supply from Mains FUSE/TYPE Replacement SpecificationsFCC Notice Warranty