Anton/Bauer DUAL 2722 owner manual Safeguards, Grounding/Earthing

Page 5

SAFEGUARDS

Power Sources: This unit was designed to operate at mains voltages from 90 to 264 Volts AC, 50-60 Hz.

Risk of Electrical Shock: Refer servicing to qualified service personnel.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

GROUNDING/EARTHING

IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED.

To ensure safe operation, the three pin plug supplied must be inserted only into a standard three-pin power point which is effectively grounded through the normal household wiring. Extension cords used with the equipment must be three-conductor and be correctly wired to provide connection to earth ground. Improperly wired extension cords are a dangerous electrical hazard.

The fact that the equipment operates satisfactorily does not imply that the power point is properly grounded and that the installation is completely safe. If any doubt exists about the correct grounding of the power point, consult a qualified electrician.

IMPORTANT: The wires in this mains lead are colored in accordance with the following code:

Green and yellow

Earth

Blue

Neutral

 

 

Brown

Live

 

 

2

Image 5
Contents PowerCharger Dual Page Table of Contents Introduction FeaturesGROUNDING/EARTHING SafeguardsApplications ChargingThree Stage Charging Methodology LED Indication Meaning LED IndicationsVCO Wait 2-READYPropac DDM DIAGNOSTIC/DISCHARGE Module To Operate The DDM Autocal Feature Operation AS DC Camera Supply from Mains FCC Notice SpecificationsFUSE/TYPE Replacement Warranty