CoreBuilder® 5000 SwitchModule
®Quick Start and Reference
1.0Introduction
The 3Com CoreBuilder® 5000 SwitchModule is a LAN switching module for the CoreBuilder 5000 Integrated System Hub. The SwitchModule is available in several media configurations and in
Before you unpack the SwitchModule, read Section 3.0, "Installation Prerequisites" and Section 5.0, "Installation Precautions".
WARNING: CoreBuilder 5000 SwitchModules must be installed only by trained service personnel.
3.0Installation Prerequisites
Before you begin the SwitchModule installation process, read the hardware and software requirements in this section.
In addition to reading this document, be sure to read the Release Note for CoreBuilder 5000 SwitchModules.
3.1Tools Required
You need a
2.0Learning About SwitchModules
This document provides the basic information that you need to install and configure a 3Com CoreBuilder 5000 SwitchModule at software Version v3.0.
For more detailed information about using the SwitchModule, see the following documents:
■CoreBuilder 5000 SwitchModule User Guide
■CoreBuilder 5000 Distributed Management Module User Guide for software Version v6.00 or later
■CoreBuilder 5000 Distributed Management Module Commands Guide for software Version v6.00 or later
You can view these documents online with the 3Com DocsOnCD documentation
To order
3.2Hardware Prerequisites
1Ensure that the CoreBuilder 5000 hub has at least one of the following management modules installed:
■
■
2Ensure that the CoreBuilder 5000 hub has the following controller module installed:
Part Number 10013592