Kompernass ULG300A1 manual Suitable laminating pouches, Operating levels, Risk of injury

Page 6

￿Risk of fire!

Do not use the appliance in the vicinity of hot surfaces.

Do not place the appliance at locations exposed to direct sunlight.

This could lead to overheating and cause irrepa- rable damage.

Do not leave the appliance unattended when in use.

NEVER cover the ventilation slits on the top of the appliance while it is switched on.

￿Risk of injury!

Keep children away from the connecting cable and the appliance. Children frequently underestimate the dangers of electrical devices.

Ensure that the appliance stands with a safe and secure positioning.

Do not operate the appliance if it has sustained a fall or is damaged. Arrange for the appliance to be checked and, if necessary, repaired by a qualified expert.

Some parts of the appliance become very hot during operation. To avoid burns, do not touch these parts.

6. Suitable laminating pouches

For hot lamination you can use pouches with a width of up to 230 mm and a maximum thickness of 125 micron.

Please note that each laminating pouch may only be used once.

￿For hot lamination, use only laminating pouches that are expressly designated for hot lamination.

For cold lamination, use only laminating pouches that are expressly designated for cold lamination.

￿Take note that the laminating pouches in- cluded with the laminator are intended exclusively for hot lamination.

7. Operating levels

Position of

Position of

Laminating foil

pouch thickness

selector switch i

thickness

switch o

 

 

 

 

 

HOT

80

> 60 - 80

 

 

 

HOT

125

85 - 125

 

 

 

Cold

125

to 200

 

 

 

Tip: For high-gloss photos, you should select the switch position “125” as well as the appropriate pouch thickness.

- 4 -

Image 6
Contents A3 Laminator ULG 300 A1 ULG 300 A1 Content Appliance description Items supplied Technical DataIntended use Rated voltage 220 240 V~ 50 HzSafety instructions Overheating ProtectionRisk of electrical shock Suitable laminating pouches Operating levelsRisk of injury Preparing for hot lamination Preparing for cold lamination Lamination processIf you have previously performed hot lami- nation Trimming function Anti-Blocking Switch ABSCleaning and care If necessary, fold the documents supports s downWarranty and Service StorageDisposal Tel 5000 700 £ 0.10 / minute Mail support.uk@kompernass.com Kompernass Service IrelandImporter Tel 930 412 0,082 EUR/Min