Chauvet led par 38 tri-b user manual Operating Instructions, Configuring the Starting Address

4.OPERATING INSTRUCTIONS

Configuring the Starting Address

Each fixture requires a starting address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the starting address. For example, a fixture that uses seven DMX channels and is addressed to start on DMX channel 100, will read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose the starting addresses for each fixture so that the channels used do not overlap. In addition, you should note the starting address selected for future reference.

The LED PAR 38 Tri-B/C fixture uses seven or three DMX channels. If this is your first time using DMX, we recommend reading the “DMX Primer” section in the “Appendix”.

Control Panel Functions

Access control panel functions using the four buttons located directly underneath the LED display on the included wired remote.

BUTTONFUNCTION

	Used to scroll through the
<MENU>	current operating mode,
	as well as back out of the
	current menu option
<DOWN>	Used to select decreasing
	advancement in the value
<UP>	Used to select increasing
	advancement in the value
<ENTER>	Used to select a value and
	store it to memory

MENU DOWN UP ENTER

The Control Panel shows the current state of the unit. It is used to select the operating mode, as well as the sub-features. For a detailed layout of the control panel functions, please see the “menu map” section on the following page.

4. Operating Instructions 12 9/22/2009 11:10 AM