Royal Sovereign RSL-2701, RSL-380 Rollers Not Running, Safety cover is not in proper position

2.3 Rollers Not Running

CAUSES

1.Safety cover is not in proper position.

2.Wire-Motor's connector is disconnected.

3.Film is jammed on the rollers.

4.Main PCB is defective.

5.Main motor is defective.

MEASURES

Before troubleshooting, be sure to disassemble the Right cover ,the Left cover and the Rear cover. Refer to how to replace each component for the disassembly of them.

1. Safety cover is not in proper position.

1) Make the edge of Safety Cover to press edge of safety cover

the lever of Micro Switch completely.

MICRO

SWITCH

2. Motor wire connectors are disconnected.

Check if the Motor wire connectors are

connected correctly.

WIRE-

MOTOR

8