Royal Sovereign Wire-Temp Fuse is disconnected, Main Fuse is disconnected.except RSL-380

Page 6

2The Wire-Temp Fuse is disconnected

1)Test if the Wire-Temp Fuse is disconnected with Multi-tester.

2)If disconnected, replace it with new one.

WIRE-TEMP FUSE

3.MAIN FUSE is disconnected.(except RSL-380)

1)Test if the Main Fuse is disconnected with Multi-tester.

2)If disconnected, replace it with new one.

4.The Bi-metal is defective.

1)Disconnect the heater wire from the Bi-metal.

2)Unfasten 2 screws holding the Bi-metal.

3)Replace it with new one.

MAIN

FUSE

BI-METAL

5

Image 6

Contents RSL-2701U RSL-380 Troubleshooting AdjustmentsWire Diagram Safety Precautions Page Troubleshooting Rollers Not HeatingWire-Temp Fuse is disconnected Main Fuse is disconnected.except RSL-380Bi-metal is defective Main PCB is defective Heater in the roller is defectiveTemperature Sensor is not work Wire thermal fuse is defectiveMain PCB is defective Sensor Assy position Wire thermal fuse is defective RSL-2701，RSL-2701USafety cover is not in proper position Motor wire connectors are disconnectedRollers Not Running No Main Power Main power wire is not connected with Main SwitchFilm is jammed on the rollers Wire-AC in is not connected with Main PCB.except RSL-380 Transformer is defectivePoor Lamination Quality Replacing Parts Right CoverLeft Cover Rear CoverMain PCB Sub PCB HeatersCross Cutter Replacement of Motor Page Adjustments SVC Parts List SHAFT-TENSION SHAFT-TABLE SVC Parts List RSL-380 Part Name SpecHeater Assy FCHW1 24Ω CUL,UK WIRE-HEATER，LINK Explode View RSL-2701/2701U Expolde View Frame L Frame R Frame, Roller and Other View Wire, Power core and Control PCB RSL-380 Expolde View FRAME-L BRACKET-PRESSURE Frame, Roller and Other View Wire, Front Table and Safety Cover RSL-2701/2701U/380 Wire Diagram AC 220 ~ 240V Wire Diagram Main PCB Layout Connect partFRAME-R Layout 220 ~

Related manuals

Manual 7 pages 15.56 Kb